High Quad Gun Mount

The HQ100 is a high quad unit designed to be used by people with no arm or hand use and comes with a power trigger to fire the weapon. It is fully adjustable up, down, back, and forth. You choose between the following firing options: sip (slight suction through a tube), bite (rubber-encapsulated bite switch), or two-button push (one button acts as a safety and must be held to make the fire button live which is hard-wired in). You can purchase a safety pendant switch as a backup safety for either the sip or bite firing option which will only allow the user to fire the weapon if the safety pendant switch button is held down. This is not necessary for the two-button push option because it already uses two buttons to fire the weapon. Choose between hand or chin joystick controls to move the weapon up, down, left, and right.

The HQ100 can operate with crossbows, rifles, and shotguns. The selectable speed controls on the windage and elevation allow you to set the speed that is most comfortable for you. It comes with a recoil compensation mechanism to help absorb the recoil of the weapon being fired for maximum comfort, safety, and accuracy. The equipment operates on 12-volt DC power (not included) and comes with a pigtail to attach to your 12-volt source.

For best results, allow approximately ½” between the trigger and the rod of the trigger mechanism, allowing the trigger mechanism to strike the trigger.

For hunting groups and/or multiple users of one HQ100, you can order multiple control configurations and an additional safety pendant switch that can be installed on one HQ100 to make it more suitable for multiple users with a variety of abilities. The encapsulated bite switch is a more sanitary option for multiple users.

HQ100 is a high quad unit designed for use by people with no arm or hand use.  This model can be operated completely with your mouth and chin. The HQ100 comes standard with a power trigger to fire the weapon. This is operated by a very slight suction on the blue tube in the picture. Windage and elevation are controlled by the joystick that can be operated by your chin. The selectable speed controls on the windage and elevation allow you to set the speed that is most comfortable for you.

To install the HQ100 on your chair, it is as simple as placing the mounting plate with receiver tube under your cushion before being transferred into the chair. Once you are in the chair, simply set the equipment in the receiver tube located between your legs. The design of the mounting plate allows the equipment to be used with almost any brand of wheelchair. If for some reason the mounting plate will not work in your situation, we will gladly work with you to design something that will. Click here for installation instructions.